MPSKIT-R8 - Multi Purpose Support Kit - Box of 8

The KlevaKlip Multi purpose support (MPS) has been designed as a mid-sized support to cater for the “gap” in the market for decks that are a bit too high for our “Adjustable joist support” and a bit too low for our “Adjustable bearer support”.

The Multi Purpose Support has excellent adjustability, along with the strength and versatility to be used with either bearer/joist combinations, or with joists on their own. Coming in a “kit” form, it is efficiently packaged and quick and easy to assemble. All parts are fully hot dip galvanised.

The MPS can be used either with a bearer/joist combination (conventional deck building), or with just larger sized joists (eg 90, 140 or 190mm) when space or practicality does not permit a standard bearer/joist combination.

Span requirements (should be taken in conjunction with your timber span tables as timber spans are often your limiting factor):

- For 2.5 kPa rated decks, you must have a minimum of one MPS per every 1.8 square metres spread evenly across your deck.

- For 4.0 kPa rated decks, you must have a minimum of one MPS per every 1.35 square metres spread evenly across your deck.

See KlevaKlip website www.klevaklip.com.au for more complete span information and diagrams

Important note: To achieve MPS load ratings, it is essential that the MPS is fixed at both fixing points on the base bracket.

Height Levels:

Minimum height with locking nut – 100 mm

Minimum height without locking nut – 90 mm

Maximum design height – 150 mm